Stainless steel water tank in the appearance and installation of construction must be completed when the pressure test can be put into use, otherwise the late use of the problem will be very troublesome.

Stainless steel water tank in the appearance and installation of construction must be completed when the pressure test can be put into use, otherwise the late use of the problem will be very troublesome. . otherwise it is not formal factories, enterprises, Xuguang water tank: the regular factory production of stainless steel water tank will make stainless steel water tank pressure test. So the pressure test of the stainless steel water tank is how to operate it? Test standards and what is it?

Shandong Xuguang stainless steel water tank pressure testing tank air conditioning equipment Co. Ltd production has obtained great achievement.

1, stainless steel water tank pressure test operation

You know the stainless steel water tank is the lowest because of the hierarchical design, full of water, the maximum pressure. So the lower side plate of stainless steel plate is the thickest (in addition to the water tank is very small, but all in accordance with the standard production can withstand water pressure), hierarchy, the upper thin. Second, to test the parts of the tank floor. Because according to the requirement of construction scheme of different use based on the ground or adopts steel welding based in the use of plates are different. Then the stainless steel water tank in the case of full water deformation of the test and other details of the test (including the seal, strength, etc.).

The test method is: first, the test instrument is used to check the tightness of the water tank body, to check whether there is a tight seal and the welding strength test. There is no leakage of the tank body, welding layer using seamless full welding, the integrity of the good, fine workmanship, etc.. After the first round of testing is completed in the construction site for 24 hours full water pressure test.

2 why do you want to have a 24 hour pressure test? Because in addition to the fire water tank water is generally do not have long-term water in the water tank is static, living stainless steel water tank and heat preservation water tank inside the water is continuous in circular flow, pressure tank water in different period also bear by the frequency of water supply equipment to adjust the pressure. So there is no after long time of pressure testing, is likely to cause because of material discomfort (general lack of experience of corporate prone to this problem, or as required by customer order, adopting the design scheme), branch Hongyang water supply and drainage equipment Co., Ltd. will scientific computing bearing conditions of water box and recommended lowest customer design standards and recommended the design standard. The last is the test of the tank foundation. As the bottom of the tank under the pressure of the largest, based on the pressure test is also very important. There are on the ground directly as a foundation and basis of two steel welding. Then ground to do the foundation, as long as the foundation is sufficient solid level in the material can be selected for the lower standard of the material. If channel steel welded base, where some of the pressure is bound to be slightly higher, experienced companies or construction team, made out of foundation can ensure that the pressure is uniform and high level. At this time the material on the bottom of the high strength of the pressure bearing stainless steel plate.

3, stainless steel water tank pressure test standard

First of all, the basis of high flatness, the level of error is not more than 2mm, to ensure uniform pressure at the bottom of the tank. The basis of our company, the level of error are strictly controlled within the 1mm, the special requirements will be higher standards, the basic no error. Secondly, the water tank is filled with water side pressure natural deformation maximum not more than 3mm, less than 1mm is the best. All products of our company are designed according to the best standard, to ensure the sufficient bearing capacity, can greatly extend the service life of the product. The service life of the stainless steel water tank is more than 20 years.